Apex House Numbers Installation Instructions

Our Apex House numbers are designed to be installed on walls but can easily be installed on your door too. Add a note on your order if you wish to be supplied fixings for your door.

These numbers can be installed 'flush' or 'floating' (just use the suppled spacers).

DIMENSIONS

Height: 11cm

Width: Between 5cm and 9cm (depending on the number)

Depth: 1cm (flush) or 2cm (floating).

WE PROVIDE: House Number, template for easy installation, 2x 5cm threaded bolts, 2x plugs, 2x spacers (These are the fixings for wall installation)

EQUIPMENT REQUIRED: A drill and suitable drill bit to make a hole for a 8mm plug, rubber mallet (or a cloth covered hammer)

INSTRUCTIONS TO INSTALL ON A WALL:

1. Determine position for template and mark 2x bolt holes.

2. Drill level holes for a 2x 8mm plugs ensuring as deep as bolts

3. Insert plugs into holes

4. Screw the 2x threaded bolts into the back of the number.

5. If a 'floating' mount is desired, slide spacers onto bolts

4. Align bolts with holes/plugs and press into place using a rubber mallet or cloth covered hammer to ensure you don't damage the metal.